IBM System Storage DS3000, Programming Manual

Page: 230 / 652

DS3524-DTL Daily / Weekly - Mon - Fri 05/23/2012 02:00AM 05/30/2012
DS3400A None
DS5100-DTL None
SMcli completed successfully.
Note: In Microsoft Windows OS, the command prompt window must have administrator authority or the
command will fail with an error message as shown below:
C:\Program Files (x86)\IBM_DS\client>SMcli -supportBundle auto disable all
Incorrect Usage
... ... ...
Do not modify any parameters to the command. Some examples are as follows:
Incorrectly modified parameters Advisory
SMcli 10.12.128.1 10.12.128.2 -supportBundle
schedule show
Do not specify IP addresses
SMcli 10.12.128.1 10.12.128.2 -c "-supportBundle
schedule show"
Do not specify IP addresses and
-c
parameter
SMcli -supportbundle schedule show
Note that
supportBundle
parameter is case sensitive and
must be typed accordingly.
Set subsystem
This command defines the properties for an subsystem.
Syntax
set subsystem [ subsystemNumber ]
addDrives=( enclosureID1,drawerID1,slotID1 ... enclosureIDn,drawerIDn,slotIDn )
raidLevel=(0 | 1 | 3 | 5 | 6)
owner=(a | b)
Parameters
Parameter Description
subsystem The alphanumeric identifier (including - and _) of the
subsystem for which you want to set properties. Enclose the
subsystem identifier in square brackets ([ ]).
addDrives
The location of the disk drive that you want to add to the
subsystem. For high-capacity disk drive expansion
enclosures, specify the enclosure ID value, the drawer ID
value, and the slot ID value for the disk drive. For
low-capacity drive expansion enclosures, specify the
enclosure ID value and the slot ID value for the disk drive.
Enclosure ID values are
0
to
99
. Drawer ID values are
1
to
5
.
Slot ID values are 1 to 32 . Enclose the enclosure ID value, the
drawer ID value, and the slot ID value in parentheses.
raidLevel
The RAID level for the subsystem. Valid values are
0
,
1
,
3
,
5
,
or 6 .
owner The controller that owns the subsystem. Valid controller
identifiers are
a
or
b
, where
a
is the controller in slot A, and
b
is the controller in slot B. Use this parameter only if you
want to change the subsystem owner.
3-184
IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide