IBM System Storage DS3000, Programming Manual

Page: 203 / 652

Notes
The
diskDrive
parameter supports both high-capacity expansion drawers and low-capacity expansion
drawers. A high-capacity expansion drawer has drawers that hold the disk drives. The drawers slide out
of the expansion drawer to provide access to the disk drives. A low-capacity expansion drawer does not
have drawers. For a high-capacity expansion drawer, you must specify the identifier (ID) of the
expansion drawer, the ID of the drawer, and the ID of the slot in which a disk drive resides. For a
low-capacity expansion drawer, you need only specify the ID of the expansion drawer and the ID of the
slot in which a disk drive resides. For a low-capacity expansion drawer, an alternative method for
identifying a location for a disk drive is to specify the ID of the expansion drawer, set the ID of the
drawer to 0, and specify the ID of the slot in which a disk drive resides.
Reset Enhanced Global Mirror Group statistics
This command resets the synchronization statistics for one or more member volumes in an Enhanced
Global Mirror Group to a relative 0.
Syntax
reset storageArray arvmStats enhancedGlobalMirrorGroup
["enhancedGlobalMirrorGroupName"]
volume="volumeName" sampleType=(all | mostRecent |
longestSyncTime | errors)
Parameters
Parameter Description
enhancedGlobalMirrorGroup
The name of the Enhanced Global Mirror Group for
which you are resetting the synchronization statistics.
Enclose the Enhanced Global Mirror Group name in
square brackets ([ ]). If the enhanced global mirror group
name has special characters, you also must enclose the
Enhanced Global Mirror Group name in double
quotation marks (" ") inside square brackets. If the
Enhanced Global Mirror Group name consists only of
numbers, such as "1002," you also must enclose the
enhanced global mirror group name in double quotation
marks (" ") inside square brackets.
volume
This parameter is optional. The name of the specific
member volume in the Enhanced Global Mirror Group
for which you are resetting the synchronization statistics.
If no volume is specified, the statistics for every member
volume in the Enhanced Global Mirror Group mirror
group are reset.
Enclose the volume name in in double quotation marks
(" ").
Chapter 3. Script Commands
3-157