IBM System Storage DS3000, Programming Manual

Page: 41 / 652

Table 2-4. Recurring Syntax Elements (continued)
Recurring Syntax Syntax Value
instance-based-repository-spec
repositoryRAIDLevel= repository-raid-level
repositoryDrives=( drive-spec-list )
[enclosureLossProtect= boolean
1
]
[drawerLossProtect=(TRUE | FALSE)
2
]) |
repositorysubsystem= subsystem-number
freeCapacityArea= integer-literal
3
Specify
repositoryRAIDLevel
with
repositoryDrives
. Do not specify the RAID level
or the disk drives with the subsystem. Do not
set
enclosureLossProtect
when you specify a
subsystem.
count-based-repository-spec
repositoryRAIDLevel= repository-raid-level
repositoryDriveCount= integer-literal
[repositorysubsystemUserLabel=user-label]
[driveType= drive-type
4
]
[enclosureLossProtect= boolean
2
]
[drawerLossProtect=(TRUE | FALSE)
2
] |
[T10PI=(none | enabled)
5
] |
wwID World-Wide Identifier
gid Group Identifier
host-type string-literal | integer-literal
host-card-identifier
(1 | 2 | 3 | 4)
backup-device-identifier
(1 | n | all)
n is a specific slot number.
Specifying all includes all of the cache backup
devices available to the entire storage subsystem.
nvsram-offset
hex-literal
nvsram-byte-setting
nvsram-value-> 0xhexadecimal |
integer-literal
nvsram-bit-setting
nvsram-mask, nvsram-value-> 0xhexadecimal,
0xhexadecimal
| integer-literal
ipv4-address
Four groups of four numeric characters (0-9)
separated by period "."
(0255).(0255).(0255).(0255)
ipv6-address
Eight groups of four hexadecimal characters (0-9
and A-F) separated by semicolon ":"
(02AF):(02AF):(02AF):(02AF):
(02AF):(02AF):(02AF):(02AF)
Chapter 2. About the Script Commands
2-7