IBM System Storage DS3000, Programming Manual

Page: 84 / 652

Notes
If the disk drives that you select for the
repositoryDrives
parameter are not compatible with other
parameters (such as the
repositoryRAIDLevel
parameter), the script command returns an error, and
Enhanced Remote Mirroring is not activated. The error returns the amount of space that is needed for the
mirror repository logical drive. You can then re-enter the command, and specify the appropriate amount
of space.
If you enter a value for the repository storage space that is too small for the mirror repository logical
drives, the controller firmware returns an error message that provides the amount of space that is needed
for the mirror repository logical drives. The command does not try to activate Enhanced Remote
Mirroring. You can re-enter the command by using the value from the error message for the repository
storage space value.
When you assign the disk drives, if you set the
enclosureLossProtect
parameter to
TRUE
and have
selected more than one disk drive from any one enclosure, the storage subsystem returns an error. If you
set the
enclosureLossProtect
parameter to
FALSE
, the storage subsystem performs operations, but the
subsystem that you create might not have enclosure loss protection.
When the controller firmware assigns the disk drives, if you set the
enclosureLossProtect
parameter to
TRUE
, the storage subsystem returns an error if the controller firmware cannot provide disk drives that
result in the new subsystem having enclosure loss protection. If you set the
enclosureLossProtect
parameter to
FALSE
, the storage subsystem performs the operation even if it means that the subsystem
might not have enclosure loss protection.
Activate Host Port
This command activates an inactive host port that was created when the Host Context Agent (HCA)
registered the host port to a host.
Syntax
activate hostPort " user-label "
Parameters
Parameter Description
userLabel
The name of the HCA host port. Enclose the host port name in double
quotation marks (" ").
Activate iSCSI Initiator
This command activates an inactive iSCSI initiator that was created when the Host Context Agent (HCA)
registered the iSCSI initiator to a host.
Syntax
activate iscsiInitiator " iSCSI-ID "
Parameters
Parameter Description
iscsiInitiator The name of the iSCSI initiator. Enclose the name in double quotation
marks (" ").
3-38
IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide