IBM SAN768B-2, Installation, Service And User Manual

Page: 71 / 186

4. Organize the cables (see “Managing cables” on page 42).
5.
Verify the chassis and connector and port status using the
switchShow -qsfp
command. A sample of the command output is shown below. The example is
from a SAN384B-2 with a core blade installed in slot 3. Some details for the
SAN768B-2 will be different (such as the slot numbers) , but the reported
information for the QSFPs will be similar. Note that the State reported for an
unconnected QSFP (shown QSFP 0 and Ports 0-3 below) is No_SigDet. This is
different from the State of No_Synch that is reported for regular SFPs that are
unconnected. QSFP 7 (ports 3/28-3/31, Index 748-751) in the following example
shows the results for a connected QSFP.
switch:FID128:admin> switchshow -qsfp
switchName: switch name
switchType: 121.3
switchState: Online
switchMode: Native
switchRole: Subordinate
switchDomain: 75
switchId: fffc4b
switchWwn: 10:00:00:05:1e:4f:eb:00
zoning: ON (zoning name)
switchBeacon: OFF
FC Router: OFF
Allow XISL Use: OFF
LS Attributes: [FID: 128, Base Switch: No, Default Switch: Yes, Address Mode
0]
Index Slot Port QSFP Address Media Speed
State Proto
=============================================================
256
3 0 0 ------ id 16G No_SigDet FC
257 3 1 0 ------ id 16G No_SigDet FC
258 3 2 0 ------ id 16G No_SigDet FC
259 3 3 0 ------ id 16G No_SigDet FC
260 3 4 1 ------ -- 16G No_Module FC
261 3 5 1 ------ -- 16G No_Module FC
262 3 6 1 ------ -- 16G No_Module FC
263 3 7 1 ------ -- 16G No_Module FC
264 3 8 2 ------ -- 16G No_Module FC
265 3 9 2 ------ -- 16G No_Module FC
266 3 10 2 ------ -- 16G No_Module FC
267 3 11 2 ------ -- 16G No_Module FC
268 3 12 3 ------ -- 16G No_Module FC
269 3 13 3 ------ -- 16G No_Module FC
270 3 14 3 ------ -- 16G No_Module FC
271 3 15 3 ------ -- 16G No_Module FC
736 3 16 4 ------ -- 16G No_Module FC
737 3 17 4 ------ -- 16G No_Module FC
738 3 18 4 ------ -- 16G No_Module FC
739 3 19 4 ------ -- 16G No_Module FC
740 3 20 5 ------ -- 16G No_Module FC
741 3 21 5 ------ -- 16G No_Module FC
742 3 22 5 ------ -- 16G No_Module FC
743 3 23 5 ------ -- 16G No_Module FC
744 3 24 6 ------ -- 16G No_Module FC
745 3 25 6 ------ -- 16G No_Module FC
746 3 26 6 ------ -- 16G No_Module FC
747 3 27 6 ------ -- 16G No_Module FC
748 3 28 7 ------ id 16G Online FC E-Port
10:00:00:05:1e:39:e4:5a "trunkmaster name" (Trunk master)
749
3 29 7 ------ id 16G Online FC E-Port
10:00:00:05:1e:39:e4:5a "trunkmaster name" (Trunk master)
750
3 30 7 ------ id 16G Online FC E-Port
10:00:00:05:1e:39:e4:5a "trunkmaster name" (Trunk master)
751
3 31 7 ------ id 16G Online FC E-Port
10:00:00:05:1e:39:e4:5a "trunkmaster name" (Trunk master)
Chapter 3. Starting and configuring the SAN768B-2
41