IBM SAN Volume Controller 2145-CG8, Hardware Maintenance Manual

Page: 166 / 372

1
Disk-drive backplane
2
Backplane edges on the 2145-CG8 and tabs on the 2145-CF8
3
Backplane-bracket slots
3. Reconnect the cables to the disk-drive backplane.
The boot-drive cable and the high-speed SAS-adapter cable are shown in Figure 123.
1
Boot-disk signal cable that is plugged into the disk-drive backplane to support drive bay 4
2
High-speed SAS-adapter cable that is plugged into the middle of the backplane to support
drive bays 0, 1, 2, and 3
(Not pictured) Backplane-control cable that should plug into the lower right connector on the
back of the backplane
4. Reconnect the boot-disk SAS cable to the SAS disk controller.
The boot-drive cable and the high-speed SAS-adapter cable are shown in Figure 124 on page 137.
1 2
Figure 123. Boot-disk SAS cable and the high-speed SAS cable connected to the disk backplane in the SAN Volume
Controller 2145-CG8 or 2145-CF8
136
IBM SAN Volume Controller Hardware Maintenance Guide
|
|