4000001a-00000000
DHCP setting changed to [arg1] by user [arg2].
Explanation:
This message is for the use case where a user changes the DHCP setting.
May also be shown as 4000001a00000000 or 0x4000001a00000000
Severity:
Info
Alert Category:
none
Serviceable:
No
CIM Information: Prefix:
IMM and
ID:
0026
SNMP Trap ID:
Automatically notify Support:
No
User response:
Information only; no action is required.
4000001b-00000000
Management Controller [arg1]: Configuration restored from a file by user [arg2].
Explanation:
This message is for the use case where a user restores a Management Controller configuration from a
file.
May also be shown as 4000001b00000000 or 0x4000001b00000000
Severity:
Info
Alert Category:
none
Serviceable:
No
CIM Information: Prefix:
IMM and
ID:
0027
SNMP Trap ID:
Automatically notify Support:
No
User response:
Information only; no action is required.
4000001c-00000000
Watchdog [arg1] Screen Capture Occurred .
Explanation:
This message is for the use case where an operating system error has occurred and the screen was
captured.
May also be shown as 4000001c00000000 or 0x4000001c00000000
Severity:
Info
Alert Category:
System - other
Serviceable:
No
CIM Information: Prefix:
IMM and
ID:
0028
SNMP Trap ID:
22
Automatically notify Support:
No
User response:
If there was no operating-system error, complete the following steps until the problem is solved:
1.
Reconfigure the watchdog timer to a higher value.
2.
Make sure that the IMM Ethernet-over-USB interface is enabled.
3.
Reinstall the RNDIS or cdc_ether device driver for the operating system.
4.
Disable the watchdog.
If there was an operating-system error, check the integrity of the installed operating system.
4000001a-00000000 • 4000001c-00000000
Appendix A. Integrated management module II (IMM2) error messages
345
Summary of Contents for Redboks System x3550 M4
