IBM Redboks System x3550 M4 Installation And Service Manual Download Page 677

Page: 677 / 820

816f0a0c-200bxxxx

An Over-Temperature Condition has been removed on the [PhysicalMemoryElementName] on

Subsystem [MemoryElementName]. (DIMM 11)

Explanation:

This message is for the use case when an implementation has detected an Over Temperature Condition

for Memory that has been Removed.

May also be shown as 816f0a0c200bxxxx or 0x816f0a0c200bxxxx

Severity:

Info

Alert Category:

Critical - Temperature

Serviceable:

CIM Information: Prefix:

PLAT and

ID:

0147

SNMP Trap ID:

Automatically notify Support:

User response:

No action; information only.

816f0a0c-200cxxxx

An Over-Temperature Condition has been removed on the [PhysicalMemoryElementName] on

Subsystem [MemoryElementName]. (DIMM 12)

Explanation:

This message is for the use case when an implementation has detected an Over Temperature Condition

for Memory that has been Removed.

May also be shown as 816f0a0c200cxxxx or 0x816f0a0c200cxxxx

Severity:

Info

Alert Category:

Critical - Temperature

Serviceable:

CIM Information: Prefix:

PLAT and

ID:

0147

SNMP Trap ID:

Automatically notify Support:

User response:

No action; information only.

816f0a0c-200dxxxx

An Over-Temperature Condition has been removed on the [PhysicalMemoryElementName] on

Subsystem [MemoryElementName]. (DIMM 13)

Explanation:

This message is for the use case when an implementation has detected an Over Temperature Condition

for Memory that has been Removed.

May also be shown as 816f0a0c200dxxxx or 0x816f0a0c200dxxxx

Severity:

Info

Alert Category:

Critical - Temperature

Serviceable:

CIM Information: Prefix:

PLAT and

ID:

0147

SNMP Trap ID:

Automatically notify Support:

User response:

No action; information only.

816f0a0c-200bxxxx • 816f0a0c-200dxxxx

Appendix A. Integrated management module II (IMM2) error messages

659

Summary of Contents for Redboks System x3550 M4





















































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Redboks System x3550 M4

Reviews:

Brands by name

Popular brands

IBM Redboks System x3550 M4, Installation And Service Manual

Search results

Summary of Contents for Redboks System x3550 M4

Reviews:

Brands by name

Popular brands