IBM Redboks System x3550 M4 Installation And Service Manual Download

Page: 732 / 820

201-812-003

Standalone Memory Test Aborted

Explanation:

Memory test is not supported for this system.

Severity:

Warning

Serviceable:

Recoverable:

Automatically notify Support:

User response:

Complete the following steps:

Perform the actions mentioned one at a time and try the test after each action.

If the problem remains, contact your technical-service representative.

Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.

Make sure that DSA and BIOS/uEFI are at the latest level.

201-813-000

Standalone Memory Test Aborted

Explanation:

Chipset Error: Can not turn OFF ECC error reporting in CPU.

Severity:

Warning

Serviceable:

Recoverable:

Automatically notify Support:

User response:

Complete the following steps:

Perform the actions mentioned one at a time and try the test after each action.

If the problem remains, contact your technical-service representative.

Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.

Make sure that DSA and BIOS/uEFI are at the latest level.

201-813-001

Standalone Memory Test Aborted

Explanation:

Chipset Error: Can not turn OFF ECC error reporting in CPU.

Severity:

Warning

Serviceable:

Recoverable:

Automatically notify Support:

User response:

Complete the following steps:

Perform the actions mentioned one at a time and try the test after each action.

If the problem remains, contact your technical-service representative.

Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.

Make sure that DSA and BIOS/uEFI are at the latest level.

201-812-003 • 201-813-001

714

IBM System x3550 M4 Type 7914: Installation and Service Guide

Summary of Contents for Redboks System x3550 M4





















































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Redboks System x3550 M4

Reviews:

Related manuals for Redboks System x3550 M4

Brands by name

Popular brands

IBM Redboks System x3550 M4, Installation And Service Manual

Search results

Summary of Contents for Redboks System x3550 M4

Reviews:

Related manuals for Redboks System x3550 M4

Brands by name

Popular brands