IBM Redboks System x3550 M4 Installation And Service Manual Download Page 792

Page: 792 / 820

166-821-001

IMM I2C Test Aborted

Explanation:

Command response could not be provided. BMC initialization in progress.

Severity:

Warning

Serviceable:

Yes

Recoverable:

Automatically notify Support:

User response:

Perform the actions mentioned one at a time and try the test after each action:

Turn off the system and disconnect it from power. Wait for 45 seconds. Reconnect it to power.

Make sure that DSA and BMC/IMM are at the latest level.

166-822-001

IMM I2C Test Aborted

Explanation:

Destination unavailable.

Severity:

Warning

Serviceable:

Yes

Recoverable:

Automatically notify Support:

User response:

Perform the actions mentioned one at a time and try the test after each action:

Turn off the system and disconnect it from power. Wait for 45 seconds. Reconnect it to power.

Make sure that DSA and BMC/IMM are at the latest level.

166-823-001

IMM I2C Test Aborted

Explanation:

Cannot execute command. Insufficient privilege level.

Severity:

Warning

Serviceable:

Yes

Recoverable:

Automatically notify Support:

User response:

Perform the actions mentioned one at a time and try the test after each action:

Turn off the system and disconnect it from power. Wait for 45 seconds. Reconnect it to power.

Make sure that DSA and BMC/IMM are at the latest level.

166-821-001 • 166-823-001

774

IBM System x3550 M4 Type 7914: Installation and Service Guide

Summary of Contents for Redboks System x3550 M4





















































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Redboks System x3550 M4

Reviews:

Related manuals for Redboks System x3550 M4

Brands by name

Popular brands

IBM Redboks System x3550 M4, Installation And Service Manual

Search results

Summary of Contents for Redboks System x3550 M4

Reviews:

Related manuals for Redboks System x3550 M4

Brands by name

Popular brands