IBM Redboks System x3550 M4 Installation And Service Manual Download Page 538

Page: 538 / 820

806f070c-2018xxxx

Configuration Error for [PhysicalMemoryElementName] on Subsystem

[MemoryElementName]. (DIMM 24)

Explanation:

This message is for the use case when an implementation has detected a Memory DIMM configuration

error has been corrected.

May also be shown as 806f070c2018xxxx or 0x806f070c2018xxxx

Severity:

Error

Alert Category:

Critical - Memory

Serviceable:

Yes

CIM Information: Prefix:

PLAT and

ID:

0126

SNMP Trap ID:

Automatically notify Support:

User response:

Make sure that DIMMs are installed in the correct sequence and have the same size, type, speed,

and technology.

806f070c-2581xxxx

Configuration Error for [PhysicalMemoryElementName] on Subsystem

[MemoryElementName]. (All DIMMS)

Explanation:

This message is for the use case when an implementation has detected a Memory DIMM configuration

error has been corrected.

May also be shown as 806f070c2581xxxx or 0x806f070c2581xxxx

Severity:

Error

Alert Category:

Critical - Memory

Serviceable:

Yes

CIM Information: Prefix:

PLAT and

ID:

0126

SNMP Trap ID:

Automatically notify Support:

User response:

Make sure that DIMMs are installed in the correct sequence and have the same size, type, speed,

and technology. One of the DIMMs :

806f070d-0400xxxx

Rebuild in progress for Array in system [ComputerSystemElementName]. (Drive 0)

Explanation:

This message is for the use case when an implementation has detected that an Array Rebuild is in

Progress.

May also be shown as 806f070d0400xxxx or 0x806f070d0400xxxx

Severity:

Info

Alert Category:

System - Other

Serviceable:

CIM Information: Prefix:

PLAT and

ID:

0178

SNMP Trap ID:

Automatically notify Support:

User response:

No action; information only.

806f070c-2018xxxx • 806f070d-0400xxxx

520

IBM System x3550 M4 Type 7914: Installation and Service Guide

Summary of Contents for Redboks System x3550 M4





















































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Redboks System x3550 M4

Reviews:

Related manuals for Redboks System x3550 M4

Brands by name

Popular brands

IBM Redboks System x3550 M4, Installation And Service Manual

Search results

Summary of Contents for Redboks System x3550 M4

Reviews:

Related manuals for Redboks System x3550 M4

Brands by name

Popular brands