IBM Redboks System x3550 M4 Installation And Service Manual Download Page 621

Page: 621 / 820

816f030c-2007xxxx

Scrub Failure for [PhysicalMemoryElementName] on Subsystem [MemoryElementName]has

recovered. (DIMM 7)

Explanation:

This message is for the use case when an implementation has detected a Memory Scrub failure

recovery.

May also be shown as 816f030c2007xxxx or 0x816f030c2007xxxx

Severity:

Info

Alert Category:

Critical - Memory

Serviceable:

CIM Information: Prefix:

PLAT and

ID:

0137

SNMP Trap ID:

Automatically notify Support:

User response:

No action; information only.

816f030c-2008xxxx

Scrub Failure for [PhysicalMemoryElementName] on Subsystem [MemoryElementName]has

recovered. (DIMM 8)

Explanation:

This message is for the use case when an implementation has detected a Memory Scrub failure

recovery.

May also be shown as 816f030c2008xxxx or 0x816f030c2008xxxx

Severity:

Info

Alert Category:

Critical - Memory

Serviceable:

CIM Information: Prefix:

PLAT and

ID:

0137

SNMP Trap ID:

Automatically notify Support:

User response:

No action; information only.

816f030c-2009xxxx

Scrub Failure for [PhysicalMemoryElementName] on Subsystem [MemoryElementName]has

recovered. (DIMM 9)

Explanation:

This message is for the use case when an implementation has detected a Memory Scrub failure

recovery.

May also be shown as 816f030c2009xxxx or 0x816f030c2009xxxx

Severity:

Info

Alert Category:

Critical - Memory

Serviceable:

CIM Information: Prefix:

PLAT and

ID:

0137

SNMP Trap ID:

Automatically notify Support:

User response:

No action; information only.

816f030c-2007xxxx • 816f030c-2009xxxx

Appendix A. Integrated management module II (IMM2) error messages

603

Summary of Contents for Redboks System x3550 M4





















































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Redboks System x3550 M4

Reviews:

IBM Redboks System x3550 M4, Installation And Service Manual, Page: 621 / 820

Search results

Summary of Contents for Redboks System x3550 M4

Reviews: