IBM QS22 - BladeCenter - 0793, Service Manual

Page: 121 / 158

Table 21. BMC firmware messages (continued)
Message Severity Event Automatic Action by
BMC
Action required by
user
Proc/IO module 1
(IO Bridge 1 Chip)
temperature over
non-recoverable
threshold.
Error IBM PowerXCell 8i companion
chip 1 Temp above Shut-Off
Temperature (100°C)
Power Off
The temperature of the
system board has reached
a critical level.
v
Check that the
BladeCenter unit
cooling system is
operating correctly.
v Replace any
missing filler
blades in the
BladeCenter unit.
v
Replace any
missing filler
blades in the
BladeCenter QS22
DIMM module
sockets.
v
Check that other
blade servers are
operating within the
recommended
temperature range.
v
Remove and
replace the blade
server, power on
and boot.
If problem persists,
please contact IBM
service.
Proc/IO module 2
(IO Bridge 2 Chip)
temperature over
non-recoverable
threshold.
Error IBM PowerXCell 8i companion
chip 2 Temp above Shut-Off
Temperature (100°C)
Power Off
The temperature of the
system board has reached
a critical level.
IBM PowerXCell 8i events
CPU 1 internal fault Error Processor Failure IBM
PowerXCell 8i processor 1
(Checkstop)
Reboot There may be a
problem with the
system board. If
problem persists,
please contact IBM
service.
CPU 2 internal fault Error Processor Failure IBM
PowerXCell 8i processor 2
(Checkstop)
Reboot There may be a
problem with the
system board. If
problem persists,
please contact IBM
service.
CPU 1 Fault +
″
Init
Failed #x
″
where x
is the number of the
error condition
Error Failure Initializing IBM
PowerXCell 8i processor 1 or
IBM PowerXCell 8i companion
chip 1
Power Off
Reboot. If the
problem persists, the
blade needs to be
replaced.
CPU 2 Fault Error Failure Initializing IBM
PowerXCell 8i processor 2 or
IBM PowerXCell 8i companion
chip 2
Power Off
Chapter 5. Diagnostics and troubleshooting
103