IBM QS22 - BladeCenter - 0793, Service Manual

Page: 96 / 158

Table 10. System firmware boot list errors (continued)
Code Message Description Action
E3401 Aborting boot, < details > Boot aborted due to error detected
by the low level code. The
< details > string provides the error
description.
Based on the < details > string you
may have to take an action on
faulty hardware or use the
Advanced Management Module to
correct the system configuration.
If the problem persists, contact
your IBM service representative.
E3402 Aborting boot, internal error. Boot aborted due to error detected
by the low level code.
The exact reason is unknown but
could be a firmware problem.
If the problem persists, contact
your IBM service representative.
E3403 Bad executable: < details > The file loaded from the boot
device is not a valid PPC
executable ELF file. The < details >
string provides more details about
the file type.
Using the Advanced Management
Module correct the boot device
configuration. Select a valid boot
device and executable path
E3404 Not a bootable device! The system cannot load an
executable file from this device.
Using the Advanced Management
Module correct the boot device
configuration. Select a valid boot
device and executable path.
E3405 No such device The specified boot device is
currently not present or not ready
for access.
Check the hardware device or use
the Advanced Management
Module to correct the system
configuration.
If the problem persists, contact
your IBM service representative.
E3406 Client application returned an
error: < details >
The OS or a standalone
application returned an error code
to the system firmware. The
< details > string provides the error
description
Based on the < details > string you
may have to take an action on
faulty hardware or use the
Advanced Management Module to
correct the system configuration. It
may be needed to perform the
firmware or OS upgrade to resolve
compatibility issues. If the problem
persists, contact your IBM service
representative.
E3407 Load failed Load or boot failed to load
requested file from the device.
This is informational message and
may be preceded by one or more
other error messages.
Based on the preceding error
messages you may have to take
an action on faulty hardware or
use the Advanced Management
Module to correct the system
configuration
E3408 Failed to claim memory for the
executable
An attempt to load executable file
from the boot device failed due to
insufficient memory or firmware
problem.
Verify that loaded file was indeed
the right executable intended to
boot this system. If not, using the
Advanced Management Module
correct the system configuration.
Otherwise, contact your IBM
service representative. You may
need to add more memory to the
system or to perform the firmware
upgrade.
78
BladeCenter QS22 Type 0793: Problem Determination and Service Guide