IBM QS22 - BladeCenter - 0793, Service Manual

Page: 120 / 158

Table 21. BMC firmware messages (continued)
Message Severity Event Automatic Action by
BMC
Action required by
user
Processor 1 (CPU 1
Chip) over critical
threshold.
Reading: x ,
Threshold: 100.00.
where
x is the temperature
of the processor.
Error IBM PowerXCell 8i processor 1
Temp above Shut-Off
Temperature ( 100°C)
Power Off
The temperature of the
processor has reached a
critical level.
v
Check that the
BladeCenter unit
cooling system is
operating correctly.
v Check airflow at
the front of the unit
is not blocked.
v Replace any
missing filler
blades in the
BladeCenter unit.
v
Replace any
missing DIMM
fillers in the
BladeCenter QS22
DIMM module
sockets.
v
Check that other
blade servers are
operating within the
recommended
temperature range.
v
Remove and
replace the blade
server, power on
and boot.
If problem persists,
please contact IBM
service.
Processor 2 (CPU 2
Chip) over critical
threshold.
Reading: x ,
Threshold: 100.00.
where
x is the temperature
of the processor.
Error IBM PowerXCell 8i processor 2
Temp above Shut-Off
Temperature ( 100°C)
Power Off
The temperature of the
processor has reached a
critical level.
Proc/IO module 1
(IO Bridge 1 Chip)
over warning
threshold.
Reading: x ,
Threshold: 98.00.
where
x is the temperature
of the Proc/IO
module.
Warning Standard mode IBM
PowerXCell 8i companion chip
1 Temp above Warning
Temperature (>98 °C)
Advanced Management
Module increases blower
speed.
No action required.
Proc/IO module 2
(IO Bridge 2 Chip)
over warning
threshold.
Reading: x ,
Threshold: 98.00.
where
x is the temperature
of the Proc/IO
module.
Warning Standard mode IBM
PowerXCell 8i companion chip
2 Temp above Warning
Temperature (>98 °C)
Advanced Management
Module increases blower
speed.
102
BladeCenter QS22 Type 0793: Problem Determination and Service Guide