IBM Netfinity 5100 8658 21Y Manual Download

Page: 25 / 246

not have redundant power. An LED on the
diagnostic panel on the system board will also
be on.

System Error Light:

This amber LED lights when a system error
occurs. An LED on the diagnostic panel on the
system board will also be on to further isolate
the error.

Ethernet speed Light:

This green LED lights when the Ethernet LAN
speed is 100 Mbps.

Ethernet Link Status Light:

This green LED lights when there is an active
connection on the Ethernet port.

Ethernet Transmit/Receive Activity Light:

This green LED lights when there is transmit or
receive activity to or from the server.

General information

Summary of Contents for Netfinity 5100 8658 21Y






















































































































































































































































Search results

Summary of Contents for Netfinity 5100 8658 21Y

Reviews:

Related manuals for Netfinity 5100 8658 21Y

Brands by name

Popular brands

IBM Netfinity 5100 8658 21Y, Manual

Search results

Summary of Contents for Netfinity 5100 8658 21Y

Reviews:

Related manuals for Netfinity 5100 8658 21Y

Brands by name

Popular brands