IBM Netfinity 5100 8658 21Y, Manual

Page: 24 / 246

Operator Information panel
The operator information panel on the front of the server
contains status lights.
OK
100
MB
LINK
OK
TX
RX
1
Information light
2
System error light
3
Ethernet transmit/receive activity light
4
Ethernet link status light
5
Ethernet speed light
6
Power-on light
7
POST complete light
8
SCSI hard disk drive in-use light
Power-on light
This green LED lights when system power is
present in the server. When this light flashes, the
server is in standby mode (the system power
supply is turned off and AC current is present). If
this light is not on, the power cord is not
connected, the power supply has failed, or this
LED has failed.
POST complete light
This green LED lights when the server
completes the power-on self-test (POST) without
any errors.
SCSI Hard Disk Drive In-use Light:
This green LED lights when there is activity on a
hard disk drive.
Information Light:
This amber LED lights when the information log
contains information about certain conditions in
your server that might affect performance. For
example, the light will be on if your server does
14
: Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y,
41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY