IBM Netfinity 5100 8658 21Y, Manual

Page: 160 / 246

/S: drive+path Specifies the drive and path to install
from . This is the directory to which the
files were copied.
/T: drive Specifies the drive to install to . Default
is the current startup drive.
/TU: drive+path Specifies the drive and path of the
CONFIG.SYS file to update. The
default is to change the CONFIG.SYS
in the root directory of the drive
specified in the /T parameter (or the
startup drive). This parameter is
ignored if the
ChangeConfig parameter
in the response file is FALSE.
For example, the line: NETFINST
/R:NETFBASE.RSP /S:Y:\NETFIN/T:C
/TU:D:\
will install Netfinity Manager, using the
options in the response file
NETFBASE.RSP, from the directory
Y:\NETFIN, to drive C: (the directory to
which the files are installed is taken
from the response file), and will modify
the CONFIG.SYS file in the D:\
directory.
Note: For information on how to use a CID-enabled
software distribution manager, refer to the
publications provided with the individual
CID-enabled product.
Customized installation
For security reasons, not all users might need to have
access to all services. User access can be restricted by
creating a customized installation that will prevent some
services from being installed.
To create a customized installation, the INSTALL.INI file
must be edited. For example, when creating a customized
Netfinity Manager for Windows 95 or NT installation, edit
the INSTALL.INI file that is found on Netfinity Manager
directory.
The INSTALL.INI file has three sections, separated by the
line
[==]
The first section contains the installation configuration that
can be selected during installation. There can be no more
than eight choices. Each choice takes up two lines. The
150
: Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y,
41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY