IBM Netfinity 5100 8658 21Y, Manual

Page: 140 / 246

– INSERT
– REFERENCES
– SELECT
– UPDATE
d. Press Enter to execute the command.
Note: Use PUBLIC or authorize only a specific ID
or group name. Netfinity Manager update
programs use the DB2SQLC0 package and
do not require specific table privileges.
To revoke privileges, substitute REVOKE for GRANT in
the command line.
To configure Netfinity Manager to discontinue export
data through ODBC for use on DB2, refer to “ODBC
database support” on page 133.
Cataloging the database in the managing system: If
the manager is using a remote database, catalog the node
the database resides on and then catalog the database to
that node.
Once this step has been completed, the name of the
Netfinity Manager database will appear in the System
Information Tools Database Selection window.
Deleting the database
The following information describes how to delete the
database for all supported operating systems.
Note: If your operating system is OS/2, refer to “Deleting
the database on OS/2”.
1. Start a DB2 command window.
2. Type
DB2 DROP DATABASE databasename
where
databasename is the name of the database as
specified during the database installation.
3. Press Enter.
Deleting the database on OS/2:
1. Insert the Netfinity Manager CD-ROM into the
database server CD-ROM drive (in this example, the
CD-ROM drive is E).
2. Start an OS/2 window or full-screen session.
3. Make the CD-ROM drive the active drive.
Type
E:
and press Enter.
4. Type the following command at the OS/2 prompt:
130
: Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y,
41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY