IBM Netfinity 5100 8658 21Y, Manual

Page: 15 / 246

v Air temperature:
– Server on: 10
║
to 35
║
C (50.0
║
to 95.0
║
F). Altitude:
0 to 914 m (2998.7 ft.)
– Server on: 10 ║ to 32 ║ C (50.0 ║ to 89.6 ║ F). Altitude:
914 m (2998.7 ft.) to 2133 m (6998.0 ft.)
– Server off: 10
║
to 43
║
C (50.0
║
to 109.4
║
F).
Maximum altitude: 2133 m (6998.0 ft.)
v Humidity:
– Server on: 8% to 80%
– Server off: 8% to 80%
Heat output: Approximate heat output in British Thermal
Units (BTU) per hour:
v Minimum configuration: 683 BTU (200 watts)
v
Maximum configuration: 2048 BTU (600 watts)
Electrical input:
v
Sine-wave input (50-60 Hz) required
v Input voltage low range:
– Minimum: 90 V ac
– Maximum: 137 V ac
v Input voltage high range:
– Minimum: 180 V ac
– Maximum: 265 V ac
v
Input kilovolt-amperes (kVA) approximately:
– Minimum: 0.08 kVA
– Maximum: 0.42 kVA
What your IBM Netfinity 5100 offers
The unique design of your server takes advantage of
advancements in symmetric multiprocessing (SMP), data
storage, Your server combines:
v Impressive performance using an innovative approach to
SMP
Your server supports up to two Pentium III
microprocessors. Your server comes with one
microprocessor installed; you can install an additional
microprocessor to enhance performance and provide
SMP capability.
v Large data-storage and hot-swap capabilities
All models of the server support up to six hot-swap hard
disk drives. This
hot-swap feature enables you to
remove and replace hard disk drives without turning off
the server.
v Redundant power capabilities
The standard 250-watt power supply in your server can
handle a load of up to 250 watts. By replacing the
power backplane with the optional backplane that
provides hot-swap capability to the power supplies, you
can install a second, optional power supply. This
General information
5