IBM Netfinity 5100 8658 21Y, Manual

Page: 127 / 246

Netfinity Manager systems running Microsoft SNA
Server can communicate with other Netfinity
Manager systems using any of the other
supported SNA stacks.
v A 9600 baud or greater modem (optional).
The hard disk requirement for Client Services for Netfinity
Manager is 6.5 MB–9 MB of hard disk space. All other
system requirements are the same as for Netfinity
Manager for Windows NT.
Notes:
1. Serial Connection Control will not function on systems
that do not have a properly installed and configured
modem.
2. To most effectively manage Windows NT systems, any
user that will be using Netfinity Manager on a Windows
NT system (locally or remotely) must have
administrator-level access to the system.
Starting the Netfinity Manager
installation program
For instructions on installing Client Services for Netfinity
Manager, see the documentation listed in “Getting more
information about Netfinity Manager” on page 147.
To start the Netfinity Manager installation program on a
system that is running Windows NT 4.0:
1. Start the computer with your operating system.
2. Place the ServerGuide Netfinity Applications CD into
the CD-ROM drive.
3. Follow the instructions for your operating system
below:
v OS/2 Warp Server
a. From a command prompt, type
x :
where x is the CD-ROM drive letter, and then
press Enter .
b. Type
SCOS2
and then press Enter . The ServerGuide
Netfinity Applications windows opens.
c. Select IBM Netfinity Manager from the
Available Applications selection list.
Note: To install Client Services for Netfinity
Manager, select
Client Services for
Netfinity Manager
117