IBM Netfinity 5100 8658 21Y, Manual

Page: 73 / 246

Handling static sensitive devices
Static electricity, though harmless to you, can seriously
damage server components or options.
Note: When you are adding an internal option, do not
open the static-protective package containing the
option until you are instructed to do so.
When you handle options and other server components,
take these precautions to avoid damage from static
electricity:
v Limit your movement. Movement can cause static
electricity to build up around you.
v
Always handle components carefully. Handle adapters,
the memory board, and memory modules (DIMMs) by
the edges. Never touch any exposed circuitry.
v Prevent others from touching components.
v When you are installing a new option, touch the
static-protective package containing the option to a
metal expansion-slot screw or other unpainted metal
surface on the server for at least two seconds. (This
reduces static electricity from the package and from
your body.)
v When possible, remove the option and install it directly
into the server without setting the option down. When
this is not possible, place the static-protective package
that the option comes in on a smooth, level surface and
place the option on it.
v Do not place the option on the server’s covers or any
metal surface.
Removing the cover, door, and bezel
The following sections describe how to remove the cover,
the door (for tower models), and the bezel.
Installing options
63