IBM Netfinity 5100 8658 21Y, Manual

Page: 118 / 246

6. Follow the instructions that are given by the setup
wizard until the program is installed.
7. Restart the server.
To install the IBM PCI Hot Plug Solution package:
1. Download the IBM PCI Hot Plug Services EXE file from
the Netfinity Support web page and extract the files
onto a diskette.
2. Log on to Windows NT Server as a user in the
Administrator group.
3. Insert the diskette into the diskette drive.
4. From the Start menu, select the Run option.
5. Type A:\SETUP.EXE in the Open box.
6. Click OK . The Setup wizard opens.
7. Follow the instructions given by the setup wizard until
the program is installed.
Windows NT Server failover setup: To install the IBM
Netfinity 10/100 Fault Tolerant Adapter device drivers:
1. Add the redundant NIC adapter according to the
instructions that are provided with the adapter.
2. Use the ServerGuide CDs to install the AMD PCNet
Ethernet Family adapter device driver.
3. Do not select the Grouping box at this point; you must
first restart the machine.
4. From the Windows NT Server desktop, select Control
Panel , then select the Network icon, then select the
Adapters tab.
5. Highlight one of the adapters that will be in the
redundant pair and then click the Properties... button.
6. Check the Grouping box. This will show the possible
combinations for redundant pairs.
7. Select the adapter pair you want and then select OK .
Note that the integrated Ethernet controller is located at
PCI bus A, slot 2.
Two options are available for recovering from a failover
condition. The options are determined by the Enable
for DMI / Hot Swap Support checkbox. If the IBM
Netfinity Hot Plug PCI for Windows NT Server 4.0
package is installed, this checkbox will appear at the
bottom of the Adapter Properties panel. If you do not
have the IBM Netfinity Hot Plug PCI for Windows NT
Server 4.0 package installed on your server, you will
not see the Enable for DMI / Hot Swap Support
checkbox.
If the Enable for DMI / Hot Swap Support checkbox is
not checked or is not present, traffic will automatically
switch back to the primary adapter when the primary
108
: Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y,
41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY