IBM Netfinity 5100 8658 21Y, Manual

Page: 45 / 246

Table 5. UNIX LLI driver messages for the Ethernet
controller (continued)
pnt0-19 IRQ found for PCnet hardware does not match
space.c (or pnt.conf)!
Explanation: This is a warning message referring to
the interrupt request (IRQ) that the SunSoft Solaris
driver found in the system.
Action: Ignore this
message if you are sure that this is what you want
to do. Otherwise, run the NETCONFIG program to
match the hardware settings
pnt0-20 add_intr_handler failed! Unknown interrupt type.
Explanation: The interrupt request (IRQ) that was
specified, or the IRQ that was found, conflicts with
other devices in the server.
Action:
v
Modify your hardware settings.
v Run the NETCONFIG program to search for
another Ethernet controller.
pnt0-21 add_intr_handler failed! Out of range interrupt
number.
Explanation: The interrupt request (IRQ) that was
specified, or the IRQ that was found, conflicts with
other devices in the server.
Action:
v Modify your hardware settings.
v Run the NETCONFIG program to search for
another Ethernet controller.
pnt0-22 add_intr_handler failed! Out of range IPL.
Explanation: The interrupt request (IRQ) that was
specified, or the IRQ that was found, conflicts with
other devices in the server.
Action: Modify your
hardware settings. Run the NETCONFIG program to
search for another Ethernet controller.
pnt0-23 add_intr_handler failed! Vector already occupied.
Explanation: The interrupt request (IRQ) that was
specified, or the IRQ that was found, conflicts with
other devices in the server.
Action: Modify your
hardware settings.
pnt0-24 add_intr_handler failed! Vector already shared at
different IPL.
Explanation: The interrupt request (IRQ) that was
specified, or the IRQ that was found, conflicts with
other devices in the server.
Action:
v Modify your hardware settings.
v Run the NETCONFIG program to search for
another Ethernet controller.
pnt0-26 The DMA number is not necessary for PCI device.
Explanation: The IBM Netfinity 10/100 Fault
Tolerant Adapter does not require a DMA setting.
Action: Edit the SPACE.C file to delete the DMA
parameter.
Diagnostics
35