IBM Netfinity 5100 8658 21Y, Manual

Page: 89 / 246

drive and do not replace it with another.
1
Non-hot-swap bay
2
Blue slide rails
3
Filler panel
4
Non-hot-swap drive
5
Slide rails
To install a non-hot-swap drive in one of the non-hot-swap
bays:
1. Read the information in “Preinstallation steps (all
bays)” on page 74.
2. Turn off the server and peripheral devices and then
remove the cover and the bezel (see “Removing the
cover, door, and bezel” on page 63 for details).
3. Remove the filler panel from the bay opening by
pulling the filler panel away from the server. You do
not need the filler panel when you have a drive
installed in the bay.
4. Touch the static-protective bag containing the drive to
any unpainted metal surface on the server; then,
remove the drive from the bag and place it on a
static-protective surface.
5. Set any jumpers or switches on the drive according to
the documentation that comes with the drive.
6. Install rails on the drive.
v If you are installing a standard-size drive:
a. Pull the blue slide rails off the back of the filler
panel.
b. Clip the rails onto the sides of the drive.
Installing options
79