Handling Static-Sensitive Devices
Handling Static-Sensitive Devices
Static electricity, though harmless to you, can seriously damage server components
or options.
Note: When you are adding an internal option, do not open the static-protective
package containing the option until you are instructed to do so.
When you handle options and other server components, take these precautions to
avoid damage from static electricity:
Limit your movement. Movement can cause static electricity to build up around
you.
Always handle components carefully. Handle adapters and memory modules
by the edges. Never touch any exposed circuitry.
Prevent others from touching components.
When you are installing a new option, touch the static-protective package
containing the option to an unpainted metal surface on the server for at least
two seconds. (This reduces static electricity from the package and from your
body.)
When possible, remove the option and install it directly into the server without
setting the option down. When this is not possible, place the static-protective
package that the option comes in on a smooth, level surface and place the
option on it.
Do not place the option on the server's covers or any metal surface.
42
Netfinity 5000 Server Hardware Information and Procedures
