Installing or Removing Internal Drives
3. Check the hard disk drive status indicators to verify that the hard disk drives
are operating properly. See “Status Indicators” on page 9 for details.
Notes:
a. There are no termination requirements for any SCSI hard disk drives
installed in the hard drive bays. Termination is achieved through the DASD
backplane.
b. If your Netfinity 5000 server has a RAID adapter or controller, you might
want to reconfigure your disk arrays after installing hard disk drives; consult
the documentation that came with your adapter or controller. Record the
configuration information in the appropriate tables in “Installed Device
Records” on page 163.
4. If you want to install or remove any other options, do so now. Otherwise, go to
“Completing the Installation” on page 76.
Chapter 4. Installing Options
65
