Appendix D: Troubleshooting and Frequently Asked Questions
212
ISDN PC Card – 18 Appendix D: Troubleshooting and Frequently Asked Questions
When you reinstall CardWizard(TM) for Windows 95 –even
the latest version available– you may see a message from
CardWizard(TM) like the one illustrated below:
You may get the adapter to work by stopping it in CardWiz-
ard(TM), removing the adapter from the PCMCIA slot, and
then reinserting it. However, you may have to do this every
time you want to use the IBM International ISDN PC Card, re-
gardless of whether you hot-insert the card or cold-start your
system. The best solution is to completely remove
SystemSoft's® CardWizard(TM) software from Windows 95
and use the adapter without it.
I have followed the instructions for installing the IBM Inter-
national ISDN PC Card in Windows 95. I am using Windows
95 OSR 2.x. Whenever I try to hot-plug the adapter, the sys-
tem freezes. What can be done to solve this?
It appears that there is a problem with the PCMCIA support in
Windows 95 OSR 2.x. This problem was not seen in the initial
release of Windows 95 and Service Pack 1. If you experience
this problem, then the only solution is to cold-insert or cold-
remove the adapter, i. e. shut down and turn off your note-
book computer, insert or remove the IBM International ISDN
PC Card in any PCMCIA slot, and then restart your computer.
