background image

Appendix F: Product Warranties and notices

ISDN PC Card – 20 Appendix F: Product Warranties and notices

237

“Wird dieses Gerät in einer industriellen Umgebung 
betrieben (wie in EN 50082-2 festgetlegt), dann kann es 
dabei eventuell gestört werden. In solch einem FA11 ist 
der Abstand bzw. die Abschirmungzu der industriellen 
Störquelle zu vergrö

β

ern.”

Anmerkung:

Um die Einhaltung des EMVG sicherzustellen sind die 
Geräte, wie in den IBM Handbüchern angegeben, zu 
installieren und zu betreiben.

European Union - emission directive

This product is in conformity with the protection 
requirements of EU Council Directive 89/336/ECC on the 
approximation of the laws of the Member States relating 
to electromagnetic compatibility.

IBM can not accept responsibility for any failure to satisfy 
the protection requirements resulting from a non-
recommended modification of the product, including the 
fitting of non-IBM option cards.

This product has been tested and found to comply with 
the limits for Class B Information Technology Equipment 
according to European Standard EN 55022. The limits for 
Class B equipment were derived for typical residential 
environments to provide reasonable protection against 
interference with licensed communication devices.

Union Européenne - Directive Conformité 
électromagnétique

Ce produit est conforme aux exigences de protection de la 
Directive 89/336/EEC du Conseil de l’UE sur le 
rapprochement des lois des États membres en matière de 
compatibilité électromagnétique.

IBM ne peut accepter aucune responsabilité pour le 
manquement aux exigences de protection résultant d’une 
modification non recommandée du produit, y compris 
l’installation de cartes autres que les cartes IBM.

Summary of Contents for International ISDN





















































































































































































































































Reviews: