IBM IntelliStation E Pro, Hardware Maintenance Manual

Page: 78 / 182

13. Connect the power cable to the back of the drive. The connectors are keyed
and can be inserted only one way.
14. If you have other options to install or remove, do so now.
15. Replace the cover (see “Replacing the cover of the 6226” on page 72).
16. Reconnect the external cables and power cords; then, turn on the attached
devices and the computer.
Installing a drive in bays 3 or 4
To install or replace drives in bays 3 or 4 of the IBM IntelliStation E Pro Type 6226
computer, complete the following steps:
1. Read the information in “Preinstallation steps” on page 64.
2. Turn off the computer and attached devices, and disconnect all external cables
and power cords.
3. Remove the cover (see “Removing the cover of the 6226” on page 60).
4. Disconnect power and signal cables to the drive.
5. If you are installing a new drive, use a screwdriver to pry the electromagnetic
cover from the drive bay.
6. Rotate the drive bay cage where you want to install or replace a drive out of
the computer chassis.
68
IBM IntelliStation E Pro Types 6216 and 6226: Hardware Maintenance Manual