IBM IntelliStation E Pro, Hardware Maintenance Manual

Page: 118 / 182

Error code/symptom FRU/action
962 (Parallel port error)
1. Run the Configuration/Setup Utility program.
2. System board.
11XX (System board serial port 1 or 2
error)
1. Run the Configuration/Setup Utility program.
2. System board.
1762 (Hard drive configuration error, IDE
only.)
1. Hard disk drive.
2. Hard disk cables.
3. Run the Configuration/Setup Utility program.
4. System board.
178X (Hard drive error, IDE only.)
1. Hard disk cables
2. Hard disk adapter
3. Hard disk drive
4. System board
1800 (No more hardware interrupt
available for PCI adapter.)
1. Run the Configuration/Setup Utility program.
2. Remove adapter.
1801 (No more ROM space available for
PIC adapter.)
1. Run the Configuration/Setup Utility program.
2. Remove adapter.
3. Disable the adapter BIOs and run the Configuration/Setup Utility
program.
1962 (Drive does not contain a valid boot
sector)
1. Verify that a startable operating system is installed.
2. Run diagnostics.
3. Hard disk drive.
4. SCSI backplane.
5. Cable.
6. System board.
5962 (IDE CD-ROM drive configuration
error)
1. Run the Configuration/Setup Utility program.
2. CD-ROM drive.
3. CD-ROM power cable.
4. IDE cable.
5. System board.
6. Battery.
8603 (Pointing-device error)
1. Pointing device
2. System board
00012000 (Machine check architecture
error.)
1. Microprocessor
2. System board
00019701 (Microprocessor 1 failed)
1. Microprocessor
2. System board
00180200 (No more I/O space available
for PCI adapter.)
1. Run the Configuration/Setup Utility program.
2. Adapter.
3. System board.
00180300 (No more memory above 1MB
for PCI adapter.)
1. Run the Configuration/Setup Utility program.
2. Adapter.
3. System board.
108
IBM IntelliStation E Pro Types 6216 and 6226: Hardware Maintenance Manual