IBM 88371RU, Maintenance And Troubleshooting Manual

Page: 102 / 186

Note: See “System replaceable units” on page 122 to determine which components should be replaced by a field
service technician.
Error code/symptom FRU/action
5962
(IDE CD-ROM drive configuration error)
1. Run the Configuration/Setup Utility program.
2. CD-ROM drive.
3. CD-ROM power cable.
4. IDE cable.
5. System board.
6. Battery.
8603
(Pointing-device error)
1. Pointing device
2. System board
00012000
(Machine check architecture error)
1. Microprocessor 1
2. Optional microprocessor 2
3. System board
00019501
(Microprocessor 1 is not functioning –
check VRM and microprocessor LEDs)
1. Microprocessor 1
2. System board
00019502
(Microprocessor 2 is not functioning –
check VRM and microprocessor LEDs)
1. Microprocessor 2
2. System board
00019701
(Microprocessor 1 failed BIST)
1. Microprocessor 1
2. System board
00019702
(Microprocessor 2 failed BIST)
1. Microprocessor 2
2. System board
00180100
(No room for PCI option ROM)
1. Reorder the adapters in the PCI slots. It is important that the
startup device is positioned early in the startup-device order so that it
is run by POST.
2. Run the Configuration/Setup Utility program Utility program to make
sure that the PCI adapter and all other adapters are set correctly;
change any incorrect memory resource settings.
3. Failing adapter.
4. System board.
00180200
(No more I/O space available for PCI
adapter)
1. Run the Configuration/Setup Utility program.
2. Failing adapter.
3. System board.
00180300
(No more memory (above 1MB for PCI
adapter))
1. Run the Configuration/Setup Utility program.
2. Failing adapter.
3. System board.
00180400
(No more memory (below 1MB for PCI
adapter))
1. Run the Configuration/Setup Utility program.
2. Move the failing adapter to slot 1 or 2.
3. Failing adapter.
4. System board.
00180500
(PCI option ROM checksum error)
1. Failing PCI adapter.
2. System board.
92
xSeries 336 Type 1879 and Type 8837: Hardware Maintenance Manual and Troubleshooting Guide