IBM 4400-006 - 4400 Model 006 B/W Direct Thermal, User Manual

Page: 79 / 326

Changing The Workgroup Name
79
Changing The Workgroup Name
To change the workgroup name using the Ethernet Interface
internal command shell, npsh:
1. Telnet to the Ethernet Interface, and log in as root with no
password.
2. At the system prompt, enter the command to store the desired
workgroup name:
store pserver smb workgrp workgroupname
(e.g., store pserver smb workgrp eng)
3. Repower the printer to cause the stored setting to take effect.
Changing Destination Names
SMART
When defining some printers within Windows environments, the
Ethernet Interface requires that you specify a predefined
destination rather than any name you would like. For example,
when creating a new printer under Windows NT, a screen similar to
Figure 22 displays.
Figure 22. Windows NT Print Setup Dialogue Box
The first field requires the IP address for the Ethernet Interface, and
the second field must be filled in with a valid destination from the
print server (e.g., d1prn). Otherwise, LPR will not be able to access
the printer. Table 6 outlines the default destinations to choose from.