IBM 4400-006 - 4400 Model 006 B/W Direct Thermal, User Manual

Page: 205 / 326

Configuring PSF/400 For IPDS On V3R7 Or V4R1
205
Configuring A TCP/IP Host Table Entry
Although optional, it is recommended that you create a TCP/IP host
table entry. Add the AS/400 name and the IP address of the LAN
adapter to the “Host Table Entries.” Also, add the hostname and IP
address of the printer to the list. You can access the host table
entries function by using the
CFGTCP
command, then selecting
option 10 from the menu.
You can also add entries to your host table for both the hostname
and the fully qualified network name for your system. The entry
name should match the name you configured for host and domain.
For example, if your hostname is “RCHASM03” and your domain
name is “RCHLAND.IBM.COM”, your fully qualified network name
is “RCHASM03.RCHLAND.IBM.COM”. In your host entry table,
enter both RCHASM03 and RCHASM03.RCHLAND.IBM.COM.
Configuring PSF/400 For IPDS On V3R7 Or
V4R1
To configure IPDS on AS/400 V3R7 and above, use the following
commands:
•
CRTPSFCFG
(Optional)
•
CRTDEVPRT
Configuring AFP With CRTPSFCFG On V3R7 Or
V4R1 (Optional)
New for V3R7 is the ability to specify three TCP/IP-related
parameters for PSF in a printer device description:
RMTLOCNAME
,
PORT
, and
ACTTMR
. In V3R2,
CRTPSFCFG
, which replaced
WRKAFP2
, was used to specify these same parameters, along with
other parameters. In V3R7 and higher, these three parameters are
ignored when specified in a PSF configuration object, since they
are specified in a printer device description. However, you may
wish to use a PSF configuration object to specify other parameters,
such as IPDS passthrough and so on.