IBM 4400-006 - 4400 Model 006 B/W Direct Thermal, User Manual

Page: 76 / 326

Chapter 4
Windows Ethernet Interface Configuration
76
c. Under the “Subnet Mask” heading, enter the Ethernet
Interface subnet mask.
NOTE:If you would like to communicate with the Ethernet
Interface from across routers, you will need to fill in an
entry within the “Routing” section. Please see
“Communicating Across Routers” on page 77 for more
details.
6. Click the SUBMIT button when done and physically repower
the printer to make the new settings take effect.
Storing The IP Address And Subnet Mask
To store the IP address and subnet mask using the Ethernet
Interface internal command shell, npsh:
a. Telnet to the Ethernet Interface using the IP address
determined in step 2 in the previous section. Log in as root
with no password.
b. At the system prompt, enter the command to store the IP
address: store tcpip 1 addr EthernetInterfaceIPaddress
(e.g., store tcpip 1 addr 192.75.11.9)
c. Now enter the command to store the subnet mask:
store tcpip 1 mask netmask
(e.g., store tcpip 1 mask 255.255.0.0)
NOTE: If you would like to communicate with the Ethernet
Interface from across routers, you need to specify a default
router using the store tcpip route command as described in
“Communicating Across Routers” on page 77.
d. Repower the printer for the stored settings to take effect.