IBM 4400-006 - 4400 Model 006 B/W Direct Thermal, User Manual

Page: 62 / 326

Chapter 3
SNMP Configuration
62
•
Short E-mail Format - specifies whether a short (15-80
character) alert e-mail message should be sent.
If enabled, the message will contain the alert description, the
severity level, and device name (unless the length of the
message exceeds the Short E-mail Message Length, in which
case the message will be truncated.
If disabled, the message will contain additional information
including the device name and location, alert description, alert
group, and alert severity level, and printer status.
Default: Disabled
•
Short E-mail Message Length - specifies the maximum size of
the short e-mail message. Acceptable values are 15 to 80
characters.
Default: 80 characters
•
Send Test Message - provides a way to test the validity of the
e-mail address/SMTP server address. If checked, a test
message will be sent to the specified e-mail address when the
submit button is pressed.
Default: All alert groups are disabled by default.
If the alert message is to be sent to a cellular phone or pager, the
Short Email Format option should be enabled. Once this option is
enabled, you may specify the maximum e-mail message length
(15-80 characters). When enabled, the message will contain the
alert description, the severity level, and device name (unless the
length of the message exceeds the Short Email Message Length, in
which case the message will be truncated).
If the Short Email format is disabled, the message will contain
additional information including the device name and location, alert
description, alert group, alert severity level, and printer status.
To test the validity of the e-mail address and the SMTP server
address, enable the Send Test Message option. If the Send Test
Message box is checked, a test message will be sent to the
specified email address when the submit button is pressed.