IBM 4400-006 - 4400 Model 006 B/W Direct Thermal, User Manual

Page: 44 / 326

Chapter 3
Configuration
44
After you configure the Smart Ethernet Interface settings, and click
the SUBMIT button on the related form, re-power the Smart
Ethernet Interface to ensure the latest settings are in use. To reset
the Smart Ethernet Interface, go to the System form under the
Configuration Menu and click the REBOOT button.
The embedded Ethernet Interface Web server gives you the ability
to configure the network adapter, monitor printer status, and to
manage print jobs. The Ethernet Interface Web page structure is
divided into several menus, as shown in Figure 4.
Configuration
SMART
The Configuration menu items allow you to configure the settings
for the following items:
•
Network - this menu item allows you to change the network
setting for each protocol: TCP/IP, NetBIOS over TCP/IP, and
Netware.
•
Print Path - this menu item allows you to change the name of
the destination queues, and define how the print job will be
preprocessed before printing. It allows you to select what
information to log, and to specify the SMTP server’s IP
address.
•
Print Model - this menu item displays model settings one at a
time.
•
Log Path - this menu item displays log path settings one at a
time.
•
I/O Port - this menu item is typically not used. It allows you to
configure the operation of the parallel port interface.
•
SNMP - this menu item allows you to configure the SNMP trap
manager settings. It also allows you to define the printer event
types to monitor, and the e-mail address that should receive
alert notifications.