IBM 4400-006 - 4400 Model 006 B/W Direct Thermal, User Manual

Page: 120 / 326

Chapter 5
Unix Host Configuration
120
8. Change the mode to correspond with the type of file you are
going to print. By default, ASCII is set for text-only files, but if
you need to print both text and graphics, select binary using the
bin
command.
9. Place the file to be printed within this directory on the Ethernet
Interface, so it can be spooled and printed.
Syntax:
put filename
10. Close the FTP session, unless you have more jobs to print.
Syntax:
quit
Setting Up AIX 4.x
1. At the command prompt, enter smitty mkvirprt.
2. At the “Add a Printer Queue” screen, select “remote.”
3. At “Type of Remote Printing,” select “Local Filtering...”
4. At “Remote Printing Type,” select “IBM.”
5. At the next “Remote Printing Type,” select “ibm4400.”
6. At “Add a Remote Print Queue with Local Filtering,” perform the
following:
a. Type in any print queue names desired in the entry fields
next to the desired emulation(s).
NOTE: At least one print queue name field must be filed in.
b. In the “HOSTNAME” field, type in the hostname or IP
address of the printer NIC.
c. In the “QUEUE” field, type in one of the four possible print
queue names found on the printer NIC. d1prn, d2prn,
d3prn, and d4prn are the four default LPD print queues on
the NIC. If the defaults have not been changed, choose any
one of these queues.
NOTE: When the IPDS feature is installed, queue name
d4prn is not available.