IBM 4400-006 - 4400 Model 006 B/W Direct Thermal, User Manual

Page: 195 / 326

Setting Up Printing For ASCII Files
195
Destination Options (DESTOPT)
Specify
XAUTOQ, XAIX. XAUTOQ
is a performance
enhancement, in which data is not required to be transformed
again if the connection is interrupted.
XAIX
allows printing of
multiple copies.
Manufacturer Type (MFRTYPMDL)
Select a manufacturer type and model. This is the name of the
WSCO. Select IBM42023 for Proprinter Emulation.
Internet address (INTNETADR)
Specify the IP address of the printer.
Verify Printing On AS/400
This section verifies that the printer is capable of printing ASCII files
and that the printer can be pinged on the network.
To test ASCII printing:
1. Start TCP/IP, if it is not already running, by entering the
command
STRTCP
.
2. Verify that the AS/400 TCP/IP interface is active.
3.
Ping
the printer from an AS/400 workstation with the
command:
ping ip_address
.
Where
ip_address
is the Internet address of the remote
system printer (the Ethernet Interface) or the hostname of the
printer (if you put the hostname in the host entry table as
directed in “Configuring A TCP/IP Host Table Entry” on page
189).
4. If the printer cannot be pinged, proceed to “AS/400 ASCII
Troubleshooting” on page 196.
Verify Printing On AS/400