IBM 17352GX, Installation And User Manual

Page: 83 / 136

Chapter 4: Using the OSCAR interface 67
Figure 4.5: Devices window
When the appliance discovers a tiered appliance or switch, the port numbering changes to identify
each connected target device.
When you select a configurable target device from the list, the Modify button becomes available,
so you can configure the correct number of ports.
To access the Devices window, complete the following steps:
1. Start the OSCAR interface.
2. Click Setup > Devices . The Devices window opens.
To assign a device type, complete the following steps:
1. In the Devices window, select the port number of the cascade device.
2. Click Modify . The Device Modify window opens.
Figure 4.6: Device Modify window
3. Select a radio button or type the number of ports on the cascade device and click OK .
4. Repeat steps 1 to 3 for each cascade appliance.
5. Click OK in the Devices window to save settings.