IBM 17352GX, Installation And User Manual

Page: 64 / 136

48 GCM2 and GCM4 Installation and User’s Guide
To configure a cascade device name and the number of channels, complete the following
steps:
1. Log into the Web interface as a user with Appliance Administrator rights.
2. Click the Configure tab, and then click Cascade Devices in the left menu.
3. Click the name of the cascade device. The Modify Cascade Device window opens.
4. Type the new name for the device.
5. Type the number of channels, between 4 and 24, for the device.
6. Click Save .
Viewing software and firmware versions for the appliance
When the Configure tab is selected, any user can click the Versions option in the left menu to view
version information about software and firmware on the appliance.
Figure 3.16: Versions window
Viewing CO cable version information and administering
firmware
When the Configure tab is selected, any user can click Versions > CO in the left menu to view
information about each CO cable: its Name, eID, Path, and Type. Any user can also click on an eID
for a CO cable to view Application, Boot, and Hardware version information and whether updated
firmware is available for the selected CO cable.