i-mate 810-F, User Manual

Page: 9 / 146

Getting To Know Your 810-F 3
Charge the battery
The device is only partially charged when you take the device out of the box. The battery may
be charged while the phone is on or off.
Warning: Your new 810-F is shipped partially charged. Before you can use your device, you need to
charge the battery using the supplied AC Adapter and charging cradle
Turn on the device
To turn ON the device, press and hold the Power button until the device vibrates. When you
turn on the device for the fi rst time, you will be asked to complete the screen calibration
process. Calibrating the device screen involves tapping the centre of a cross with the stylus
as the cross moves around the screen. This process ensures that when you tap the screen
with your stylus, the tapped item is activated accurately.
Should you wish to repeat the calibration process, you can do this at any time by following the
procedure within Chapter 2.
Connecting to AC Power and Charging the Battery
1. Fully charge the battery before starting to use your Device.
2. Fit the converter plug to the AC adapter. Connect the mini-USB end of the AC adapter to your device charging
cradle and the other end to a wall outlet.
· The charge indicator glows solid red when charging is in progress and changes to solid green when charging
is completed.
· Do not disconnect your Device from AC power until the battery is fully charged. This will take a couple of hours.
· When charging the battery for the very fi rst time, charge it for at least 8 hours.
WARNING:For optimal performance of the lithium battery, take note of the following:
Do not charge the battery where the temperature is high (e.g. in direct sunlight).
If you will not use the product for a long period of time, be sure to fully charge the battery at least once
every two weeks.