i-mate 810-F, User Manual

Page: 38 / 146

32 i-mate |
User Manual
3. Tap Next and enter the information according to the type of connection. If you need to enter a fi xed IP and/or
DNS/WINS addresses for your network, or to disable compression, tap Advanced.
4. Once fi nished, tap on Set up my proxy server, and enter the Proxy Information, including any WAP Proxy required
by the operator if setting up a connection to their WAP site.
· My Work Network might have a different name, e.g. the name of your workplace, if you have chosen to customise
it elsewhere.
· Setup my proxy server, located under My Work Network, changes to Edit my proxy server once proxy settings have
been entered.
Connect to a VPN using the Internet
Please ensure fi rst that you have a successful GPRS connection set up. The VPN connection
uses the existing Internet connections to connect to your work network. Please see also the
next section Connect to Intranet URLs for further information on this subject.
Every network connection is different. You should gather all the relevant information or
network settings you need before starting this process. This includes VPN type (IPSec/L2TP
or PPTP), host name/IP, any pre-shared key, user name, password, domain (If provided by an
ISP or a network administrator) and fi xed IP address (if required).
1. Tap Start > Settings > Connections tab > Connections.
2. In My Work Network, My Work Network might have a different name, e.g. the name of your workplace, if you have
chosen to customise it elsewhere, tap Add a new VPN server connection.
3. Enter a name that you would like to use for this connection.
4. In Host name/IP: enter the VPN server name or its IP address.
5. In VPN type, select the type of VPN.
6. Tap Next.