i-mate 810-F, User Manual

Page: 140 / 146

134 i-mate |
User Manual
REGULATORY NOTICES
Agency identi fi cation numbers
For regulatory identi fi cation purposes, your product is assigned a model number of i-mate 810-F.
To ensure continued reliable and safe operation of your Pocket PC, use only the accessories
listed in this document.
This product is intended to be charged only from an i-mate 810-F approved battery charger
(rated 5V dc, 1A).
European Union Declaration of Conformity
The CE marking indicates that the product to which it is af fi xed complies with all the applicable
Directives of the European Parliament and Council of the European Union, in particular the
Radio & Telecommunications Terminal Equipment (R&TTE) Directive, 1999/5/EC.
The i-mate model 810-F conforms to the following European Norms:
· EN 60950-1:2001 (IEC 60950-1 (Modi fi ed)) - Information technology equipment - Safety - Part 1: General requirements.
· ETSI EN 301 511 V9.0.2(2003-03) - Mobile communications (GSM); Harmonized standard for mobile stations in the
GSM 900 and DCS 1800 bands covering essential requirements under article 3.2 of the R&TTE directive (1999/5/EC).
· ETSI EN301 908-1 V2.2.1 and EN301908-2 V2.2.1 - Electromagnetic compatibility and Radio spectrum Matters
(ERM); Base stations (BS) and User Equipment (UE)…Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA
FDD) (UE) covering covering essential requirements of Article 3.2 of the R&TTE directive.
· ETSI EN 300 328 V1.7.1 - Electromagnetic compatibility and Radio spectrum Matters (ERM); Wide-band
transmission systems; Data transmission equipment operating in the 2,4 GHz band and using spread spectrum
modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE directive.
· ETSI EN 301 489-1 V1.7.1 - Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements.
· ETSI EN 301 489-7 V1.3.1 - Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) for radio equipment and services; Part 7: Speci
fi c conditions for mobile and portable radio and
ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS).
· ETSI EN 301 489-17 V1.2.1 - Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) for radio equipment and services; Part 17: Speci
fi c conditions for 2,4 GHz wideband
transmission systems and 5GHz high performance RLAN equipment.
· ETSI EN 301 489-24 V1.3.1 - Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) for radio equipment and services; Part 24: Speci
fi c conditions for IMT-2000 CDMA Direct
Spread (UTRA) for mobile and portable (UE) radio and ancillary equipment.
· ETSI EN 300 440-1 V1.3.1(2001-09) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Short
range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 1: Technical characteristics
and test methods
· ETSI EN 301 489-3 V1.4.1 (2002-08) - Electromagnetic compatibility and Radio spectrum matters (ERM); EMC
standard for radio equipment and services standard for radio equipment and services; Part 3: Speci
fi c conditions
Short range devices (SRD) operating on frequencies between 9kHz to 40GHz
· EN 50371:2002 - Generic standard to demonstrate the compliance of low power electronic and electrical apparatus
with the basic restrictions related to human exposure to electromagnetic
fi elds (10MHz - 300 GHz) - General public.
· EN 50360 - 2001 – Product standard to demonstrate the compliance of mobile phones with the basic restrictions
related to human exposure to electromagnetic
fi elds (300 MHz ~ 3 GHz).