i-mate 810-F, User Manual

Page: 63 / 146

Messaging 57
NOTE: The domain name is not required for an Internet service provider account, but may be required for
a work account.
5. To complete setup with the current synchronization settings, tap Finish.
To adjust the synchronization settings later, you can select the account and tap Menu >
Options, make the changes you want, then tap Finish.
WARNING: If you save your password and then lose your phone, someone fi nding your phone might be
able to gain access to your email.
Setup a Microsoft Outlook email account
A Microsoft Outlook email account is hosted on a Microsoft Exchange Server. You will need to
have this account set up fi rst before carrying on with the other steps described in this section.
To complete the setup for synchronization with Microsoft Exchange, you will need to get the
name of the Exchange server and the server domain name from your service provider or
system administrator. You must also know your Exchange user name and password.
NOTE: Before changing synchronization settings on your device, disconnect it from your PC.
1. Tap Start > Programs > ActiveSync > Menu > Con fi gure Server.
TIP: If this is your fi rst time setting up synchronization with Exchange Server, this will say Add Source
instead of Con fi gure Server.
2. Enter your full email address and tap NEXT.
3. Enter your user name, password and domain.
4. To enable the device to synchronize with Exchange Server automatically, select Save password. To change the
rules for resolving synchronization con fl icts, tap Advanced.
5. Tap Next.
6. Select Email and any other types of information you want to synchronize with Exchange Server. To change
available synchronization settings, select the type of information and tap Settings.
NOTE: Settings may be concealed under the Input Panel; hide the Input Panel.
7. Tap Finish.