Hyundai 2020 SANTA FE Manual Download Page 468

Page: 468 / 555

GIIN

E O

OIIL

Checking the Engine Oil Level

1. Follow all of the oil manufacturer's

precautions.

2. Be sure the vehicle is on the level

ground in P (Park) with the park-
ing brake set. If possible, block the
wheels.

3. Turn the engine on and allow the

engine to reach normal operating
temperature.

4. Turn the engine off and wait about

five minutes for the oil to return to
the oil pan.

5. Pull the dipstick out, wipe it clean,

and re-insert it fully.

6. Pull the dipstick out again and

check the level. The level should
be between F and L.

7. If it is near or at L, add enough oil

to bring the level to F.

Use only the specified engine oil.

(refer to "Recommended Lubricants
and Capacities" in chapter 8).

7-21

Maintenance

OPDE076067

OTM078022L

OTM078022

■

2.4 GDI

■

2.0 Turbo-GDI

TMa CAN-E 7.qxp 5/21/2019 12:25 PM Page 21

Summary of Contents for 2020 SANTA FE












































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2020 SANTA FE

Reviews:

Related manuals for 2020 SANTA FE

Brands by name

Popular brands

Hyundai 2020 SANTA FE, Manual

Search results

Summary of Contents for 2020 SANTA FE

Reviews:

Related manuals for 2020 SANTA FE

Brands by name

Popular brands