manualshive.com logo in svg

Hyundai 2020 SANTA FE, Manual, Page: 144 / 555

Share
Download
Hyundai 2020 SANTA FE Manual Download Page 144

3-52

Convenient features of your vehicle

Hood

Opening the hood 

1. Park the vehicle and set the park-

ing brake.

2. Pull the release lever to unlatch

the hood. The hood should pop
open slightly.

3. Go to the front of the vehicle, raise

the hood slightly, push up the sec-
ondary latch (1) inside of the hood
center and lift the hood (2). After it
has been raised about halfway, it
will raise completely by itself.

Closing the hood

1. Before closing the hood, check in

and around the engine compart-
ment to ensure the following:
- Any tools or other loose objects

are removed from the engine
room area or hood opening area

- All glove, rags, or other com-

bustible material is removed
from the engine compartment

- All filler caps are tightly and cor-

rectly installed

2. Lower the hood halfway (lifted

approximately 30 cm (12 inches)
from the closed position) and push
down to securely lock in place.
Then double check to be sure the
hood is secure. If the hood can be
raised slightly, it is not securely
locked. Open it again and close it
with more force.

E

EX

XT

TE

ER

RIIO

OR

R  F

FE

EA

AT

TU

UR

RE

ES

S

OTM048028

OTMA048029

TMa CAN-E 3A(~114).qxp  5/21/2019  11:12 AM  Page 52

Summary of Contents for 2020 SANTA FE












































































































































































































































































































































































































































































































































































Reviews:

No comments