5-71
Dri
ving y
our v
ehicle
5
• The options for the initial Blind-
Spot Collision Warning includes
the following:
- Normal:
When this condition is selected,
the initial Blind-Spot Collision
Warning is activated normally. If
this setting feels sensitive,
change the option to 'Later'.
The warning activation time may
feel late if a vehicle at the side or
rear abruptly accelerates.
- Later:
Select this warning activation
time when the traffic is light and
you are driving in a low speed.
Information
If you change the warning timing, the
warning time of other systems may
change. Always be aware before
changing the warning timing.
• The driver can select the warning
volume of Blind-Spot Collision
Warning in the User Settings in the
LCD display by selecting 'User
Settings
→
Driver Assistance
→
Warning Volume
→
High/Medium/
Low'.
For more details, refer to "LCD
Display" in chapter 3.
Information
If you change the warning volume, the
warning volume of other systems may
change. Always be aware before
changing the warning volume.
Operating Conditions
The system enters the ready status,
when 'Active Assist' or 'Warning
Only' is selected and the following
conditions are satisfied:
• Active Assist
1) The Blind-Spot Collision-Avoidance
Assist system will activate when :
- Vehicle speed is between 60
km/h and 180 km/h (40 mph and
110 mph).
- The system detects both of the
lane lines.
- An approaching vehicle is detect-
ed next to or behind your vehicle.
2) The Blind-Spot Collision Warning
system will activate when :
The vehicle speed is above
approximately 30 km/h (20 mph).
• Warning Only
1) The Blind-Spot Collision Warning
system will activate when :
- The vehicle speed is approxi-
mately 30 km/h (20 mph).
❈
The Blind-Spot Collision-Avoidance
Assist system is not activated.
i
i
OTMA058094
TMa CAN-E 5.qxp 5/21/2019 10:55 AM Page 71