Hyundai 2020 SANTA FE Manual Download Page 193

Page: 193 / 555

3-101

Con

enient f

atur

es of y

ur v

ehicle

Items

Explanation

SCC Reaction

• Fast / Normal / Slow
To adjust the sensitivity of the Smart Cruise Control system.

For more details, refer to ''Smart Cruise Control with Stop & Go'' in chapter 5.

Driving assist

• Leading vehicle departure alert
To activate or deactivate the Leading Vehicle Departure Alert function.

For more details, refer to the "Leading vehicle departure alert" in chapter 5.

Driver Attention Warning

• High sensitivity / Normal sensitivity / Off
To adjust the sensitivity of the Driver Attention Warning.

For more details, refer to the "DAW (Driver Attention Warning)" in chapter 5.

Warning Timing

• Normal / Later
To select when to provide a warning for all driver assistance.

Warning Volume

• High / Medium / Low
To adjust the warning sound volume of all driver assistance.

Lane Safety

• Active LKA: If selected, the system controls the vehicle and provides a warning when the vehi-

cle leaves the lane.

• Standard LKA: If selected, the system controls the vehicle and provides a warning when the

vehicle leaves the lane.

• Lane Departure Warning: If selected, the system provides a warning when the vehicle leaves

the lane.

• Off: Deactivates the LKA system.

For more details, refer to the "Lane Keeping Assist (LKA) System" in chapter 5.

2. Driver Assistance

TMa CAN-E 3A(~114).qxp 5/21/2019 11:15 AM Page 101

Summary of Contents for 2020 SANTA FE












































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2020 SANTA FE

Reviews:

Hyundai 2020 SANTA FE, Manual, Page: 193 / 555

Search results

Summary of Contents for 2020 SANTA FE

Reviews: