manualshive.com logo in svg

Hyundai 2020 SANTA FE, Manual, Page: 375 / 555

Share
Download
Hyundai 2020 SANTA FE Manual Download Page 375

5-95

Dri
ving y

our v

ehicle

5

Note that the vehicle
speed must be at least
approximately 64 km/h
(40 mph) to ENABLE the

LKA system. The indicator in the
cluster display will illuminate green.
The color of indicator will change
depending on the condition of LKA
system.

- White : Sensor does not detect

lane markers or vehicle
speed is under 64 km/h (40
mph).

- Green : Sensor detects lane mark-

ers and the system is able
to control vehicle steering.

Information 

If the indicator (white) is activated
from the previous ignition cycle, the
system will turn ON without any addi-
tional control. If you press the LKA
switch again, the indicator on the clus-
ter goes off.

LKA system activation

• To see the LKA system screen on

the LCD display in the cluster,
select Assist mode (

).

For more

details, refer to "LCD Display
Modes" in chapter 3.

i

OTM058064L

The Lane Keeping Assist (LKA)
system is a system to help pre-
vent the driver from leaving the
lane. However, the driver should
not solely rely on the system
but always check the road con-
ditions when driving.

WARNING  

TMa CAN-E 5.qxp  5/21/2019  10:56 AM  Page 95

Summary of Contents for 2020 SANTA FE












































































































































































































































































































































































































































































































































































Reviews:

No comments